How it Works
Simple One Button Operation
- Connect WakeWatch to a 12V outlet on your boat.
- Press the main button to power on WakeWatch.
- Wait for the LED bar to turn blue to indicate valid GPS lock.
- Press the control button to activate automatic flag control.
- Enjoy the ride! When a rider falls and the boat slows down, the flag will automatically go up.
Let Off the Throttle, Flag Does the Rest
One Button Navigation
Power on:
• Single press
Standby mode:
• Single press
GPS mode:
• Single press
Speed Adjust Mode:
• Hold 3 seconds → release to enter
• Single press to change speed
• Hold to exit
Manual flag deploy:
• Double press to deploy
• Single press to exit
Power down:
• Hold 5 seconds → release
Status LED Color Guide
White Fill
Booting Up: The system is in the process of starting and initializing.
Solid Red
Standby Mode (No GPS): The system is idle and trying to aquire a GPS signal.
Solid Blue
Standby Mode (GPS Ready): GPS signal confirmed, but the system is in standby.
Flashing Red
GPS Mode (No GPS): Searching for GPS. Flag stays down until lock is established.
Oscillating Orange
GPS Mode (Flag Up): Boat peed is below threshold. Flag is up.
Pulsing Green
GPS Mode (Flag Down): Speed is above threshold. Flag is down.
Flashing Green (Standard Model)
Speed Adjustment Mode
Adjust speed:
Half Bar: Low speed
Full Bar: High speed
Purple Fill (Pro Model)
Speed Adjustment Mode
Speed threshold increases as the bar fills. Adjust as needed.
Strobing White
Powering Down
The system is shutting down. It will turn off when the flag is fully retracted.